Messer Cutting & Welding K4 Instrucciones de operaciones descargar pdf (Pagina 41)

4 Description of control M200 / M210 (optional)

4/10

4.6.5 Error messages on M210 display unit

4.6.5.1 Short-circuit fault in welding torch / workpiece

Signal light Short-circuit between wire electrode (or gas nozzle) and

workpiece

4.6.5.2 General error messages

Via error message shown on the display

Message on the display Possible cause Fault elimination

Both displays flashing

• Error situation as under

4.6.5.1

• Lift welding torch from the

workpiece

Error message

e.g. E1

• Error in the machine • Service situation

Error message

e.g.: E6

• WF case not connected

(decompact only)

• Cable breakage

• No data transfer to M200

control

• For decompact machine,

connect WF case.

• Check control lead for

damage

• Service situation

4.7 M110 (optional) digital V / A meter with hold function

4.7.1 Display of actual values during and after welding

The digital VA meter M110 is available as an option for control M100 or M200.

This display informs the welder of the current power and voltage values during the welding

operation. In addition, the last welding data for the welding current and voltage is saved on the

display (Hold function).

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 89 90

Sin comentarios

Messer Cutting & Welding K4 Instrucciones de operaciones Pagina 41